Warm Water
Australian Designed & Manufactured
WWC9 Warm Water With Back Up Unit -
Reduces Capital Cost of 2 Units
Health Department Approved Warm Water System
Brief Description:
The "Boilerland" Warm Water System (WWS) is an Australian designed process to provide 42oC warm water for all establishments that have a peak demand exceeding 500 litres of warm water per hour.
Disinfection of the warm water in the loop and cold make up water is available as an option by fitting an approved Boilerland integral UV system.
An option on the "Boilerland" Warm Water System is the provision of separate connections for 65oC water for kitchen and laundry use.
Heating Water can be used from the boiler jacket for radiators, ceiling and wall panels, in the conventional manner: (The heating load must be advised).
| Most importantly, THE BOILERLAND WARM WATER SYSTEM fully complies with the NATIONAL PLUMBING CODE, AS3500.4 - 1994, Clause 1.10 WATER TEMPERATURE, minimum storage temperature for hot water shall be 60 Deg C, and hotwater delivery temperature shall not exceed - (a) 43.5 Deg C for early childhood centres, primary and secondary schools and nursing homes or similar facilities for aged, sick or disabled persons; and (b) 50 Deg C in residential buildings at the outlet of all sanitary fixtures used primarily for personal hygiene purposes (i.e. in bathroom and ensuites). |
 WW4 Warm Water System
|
|
ENERGY SOURCE
- Gas Fired (Natural/LPG)
- Electric Element
- Steam
- HTHW (High Temperature Hot Water)
- Geo Thermal
Standby (Backup) heating unit can be supplied as an integral part of the "Boilerland" Warm Water System.
WW 2 Warm Water System
TECHNICAL SPECIFICATION
Patent No. PL5404
|
|
Model
|
42 oC
Warm Water
Liters Per Hr
|
KW Rating
|
Gas Consumption
Mj / Hr
|
Electrical Power
Amps / Phase
|
|
WW 1
|
1433
|
50
|
215
|
10 / 1
|
|
WW 2
|
2150
|
75
|
317
|
10 / 1
|
|
WW 3
|
2583
|
125
|
530
|
10 / 1
|
|
WW 4
|
5733
|
200
|
847
|
10 / 1
|
|
WW 5
|
8170
|
285
|
1207
|
10 / 1
|
|
WW 6
|
11466
|
400
|
1700
|
10 / 1
|
Note:
Based on water supply of 12oC and supply pressure of 300-700 Kpa
Gas supply pressure 3 - 5 Kpa
NSW Health Department Approvals,
WWSA-01/34/35/36/37/38/39/40
UV Disinfection Approval PDA 085
CONVERT YOUR HOT WATER BOILER TO AN
"APPROVED BOILERLAND WARM WATER SYSTEM"
 |
- Reduces capital cost
- Factory tested before installation
- Uses existing pipework
- Minimal downtime
- Installation will supply warm water to Health Dept specifications
|
Subject to regulatory approval and boiler condition